Q8A Split Core Clamp On Current Transformer 5A high precision for Oscilloscope Current Monitoring
The model Q8A2 permalloy core 5A Clamp On Current Transformer with high accuracy up to 0.1% has been designed for use with multimeters, recorders, power analysers, safety testers etc.
Clamp-on CT's & Flexible AC Current Probe; Split Core CT's ( AAC to AAC ) / (AAC to AAC) Flexible Current Transformer (FCT Series) Clamp-On Current Transformer (CCT Series) High Precision CT's; Clamp - On AC Transformer.
GFUVE Q8 Series of Clamp-On Current Transformer's are designed for fast and easy installation. Clamp-On CT uses Permalloy Magnetic Core or Silicon Amorphous Core, with characteristics of small size. high precision, good stability and strong anti-interference ability.
A common form of current clamp comprises a split ring made of ferrite or soft iron. A wire coil is wound round one or both halves, forming one winding of a current transformer. The conductor it is clamped around forms the other winding. Like any transformer this type works only with AC or pulse waveforms, with some examples extending into the megahertz range.
Features
· Suitable for 5A, 10A cable online measurement
· Holding wire diameter: φ8mm
· Dimension: 45mm×158mm×25mm
· Load capacity: ≤4Ω
· Installation: clamp type
· Output mode: lead output
Parameter
| Electrical parameters |
| Ratio | 1000: 1 or 2000:1 (customized) |
| Accuracy | 0.1 %,0.2% |
| Primary current | 0 - 10A AC |
| Secondary current | 0 - 10mA AC or 0 - 100mV AC (customized) |
| Max. Cont. Input current | 12A |
| Over voltage category | CAT III 600V |
| Output signal (AC current) | From 0 to 10mA AC at nominal input current |
| Electrical parameters - continued | |
| Output signal (AC voltage) | From 0 to 100mV AC at nominal input current |
| Frequency range | 40Hz-2000Hz |
| Dielectric strength | 3KV 50Hz/60Hz at 1 minute |
| Temperature range | -20°C to +55°C |
| Output | 2.5 meter cable with D01 connector |
| Max. voltage not insulated conductors | 600 V |
| Standard | EN 61010-1, EN 61010-2-032, IEC60044-1 |
| Installation | Clamp type |
| Output mode | Lead output (2.5m) |
| Mechanical parameters |
| Dimensions (L x W x H) (mm) | 45x158x25 |
| Weight (g) | 250 |
| Holding wire diameter (mm) | φ8 |
| Max. jaw opening (mm) | 8 |
| Color | Black |
| Material | PC+ABS+Polycarbonate, UL94 V0 |
Selection
| Model | Rate Current | Max Current | Secondary Current | Coil Ratio | Burden Resistance | Accuracy |
| Q8A2-5-1 | 5A | 6A | 5mA | 1000:1 | customized | 0.1% |
| Q8A2-5-2 | 5A | 6A | 2.5mA | 2000:1 | customized | 0.1% |
| Q8A2-5-11 | 5A | 6A | 500mv | 1000:1 | customized | 0.1% |
| Q8A2-5-21 | 5A | 6A | 500mv | 2000:1 | customized | 0.1% |
| Q8A2-10-1 | 10A | 12A | 10mA | 1000:1 | customized | 0.1% |
| Q8A2-10-2 | 10A | 12A | 5mA | 2000:1 | customized | 0.1% |
| Q8A2-20-1 | 20A | 24A | 20mA | 1000:1 | customized | 0.1% |
| Q8A2-20-2 | 20A | 24A | 10mA | 2000:1 | customized | 0.1% |
| Q8A2-10-12 | 10A | 12A | 4mA | 2500:1 | customized | 0.1% |
| Q8A2-10-22 | 10A | 12A | 1V | 1000:1 | customized | 0.1% |
| Q20B-20-12 | 10A | 12A | 5V | 1000:1 | customized | 0.1% |
Photo
Product Tags:
|
|
2.5m Lead Output Oscilloscope Clamp On Current Transformer 5A High Accuracy For Current Monitoring Images
|
